RY-LPIGE-804GBTME

  • Top hat rail mounting
  • Copper ports: 8x10/100/1000TX, RJ45, PoE/PoE+
  • Optical fibre ports: 4x100/1000SFP
  • Managed, Layer 2/3, ring redundant, DMS
  • IEEE 1588 V2, PTP
  • Power supply 48-57VDC, redundant
DATA SHEET
CONTACT
NDAA CompliantTAA Compliant
Product information
Technical data
Firmware
Software
Downloads
Complementary products

This series includes high quality switches of robust construction for the implementation of powerful 10, 100 and 1000MBit/s Ethernet ring structures as per IEEE802.x. All eight copper ports are with Power over Ethernet PoE and PoE+. These switches are especially suitable for video networks. By way of two or more connections, the switch enables the construction of one or more fault-tolerant optical fiber rings

Product information

Short description

Industrial L2/L3 Switch with management, PoE and PoE+ and DMS

Special features for video networks

Active monitoring of the camera
Switch-powered cameras by PoE are constantly monitored. In case of a camera failure the switch automatically restarts the camera. If this is not possible the switch alarms by SNMP.  

Active monitoring PoE-supply 
The switch alarms by SNMP in case of sudden excessive power consumption by a defect camera for example.

Active management of the PoE-performance
The PoE-ports can be started by time intervals so as to prevent an overload of the PoE power supplies. 

Further video-friendly features:
Extra high backplane performance for a smooth video transmission with all ports assigned. Support of Jumbo Frames up to 9600Bytes by 100MBit/s.  MAC-address restriction ensures port security.

DMS

This switch disposes of an integrated network monitoring and control system which gives the user a good overview over the whole network in an easy way. This DMS-system has the following qualities:

Graphical network map 
The network map gives a quick overview over all switches and terminal devices such as IP-cameras or servers indicating the IP-address, type of device and equipment. Plans and maps can be saved as background pictures and thus enable the user to access to certain devices without knowledge of the entire IP-structure. 

Device search
This function enables the access to a specific device also in large networks. Recently added devices, as per example a new IP-camera, are immediately displayed and thus enable a direct access. 

Data traffic display
Graphical display of data traffic per port in a time axis. 

Error handling and security
Network diagnosis between master switch and terminal devices. Protective mechanisms such as data flow restriction guarantee an effective protection against inadvertent access. IEEE802.3ah and IEEE802.1ag provide tools for structuring of networks. 

Special features

USB-config-port: For FW-Update, backup, restore, boot up and syslog, USB2.0 A-Typ

System notes

The switch supports PTP, precision time protocol according to IEEE1588 v2 and IEC 61588, a feature used in industrial automation, professional audio-video applications for audio-video bridging and telecommunications, among others.

Installation method

DIN-rail mounting

Ventilation

Fanless

Contents of the pack

Switch
DIN mounting clamp
RJ45 to D-Sub 9 console cable
Information card QIG

Technical data

Copper ports
8 x 10/100/1000TX, 8xPoE+ 802.3af/at
Maximum  PoE performance for all ports: 240W
PoE ports
8 x 802.3af/at, PoE+, 30 W, Class 0-4
PoE budget
240 W
Fibre optic ports
4 x 100/1000, SFP

We recommend the use of our barox SFPs. We do not test or guarantee the compatibility of our devices with SFPs of other manufacturers.

Console port
RS232, 115,2kBit/s, 8, N, 1, RJ45
Alarm contacts
The switch has a digital input contact and a digital output contact

The input allows an SNMP trap or an email to be sent, or the output contact to be switched.
An input voltage of 0 VDC to 6 VDC is interpreted as 0
An input voltage of 10 VDC to 24 VDC is interpreted as 1.

A selection of possible error messages is available in the GUI for the output contact.
When the selected error messages occur, the contact switches as required.
The output contact is potential-free and can be loaded with a maximum of 24 VDC and 1 A.
Supply voltage
48-57VDC, redundant supply is possible, screw terminal
Power consumption
15W max (without PoE)
MTBF
25°C: 476'206h
75°C: 92'110h
Operating temperature
-40°C to +75°C
Rel. humidity: 5% to 95%, non-condensing
Thermal power loss
109 BTU/h
Dimensions
135x62x130mm (HxWxL)
Weight
Gross weight: 1.0 kg
Net weight: 0.78 kg
Test standards
EMV: IEC61000-4-2, 4-3, 4-4, 4-5, 4-6, 4-8  
EMI: FCC Part 15 Class A, EN61000-3-2, -3-3, -6-4, EN55022, EN55011  
Free fall: IEC60068-2-32  
Shock: IEC60068-2-27  
Vibration: IEC60068-2-6  
Railway standard: EN50121-4, EN50155  
Transport: NEMA TS2
IEEE1613
Backplane
24 GBit/s
MAC table
8k
Forwarding Rate
17.9 Mpps
xNMS Support
Supports xNMS version 1.0 and above
Firmware version xy and above
Jumbo Frames
Jumbo frames of up to 9600 bytes are also supported at 100 Mbps.
Configuration
Console, Webserver, Telnet, CLI, SNMP v1/v2/v3, TFTP, SSH, SSL, RMON, USB
Port settings
As per port: Port disable/enable, auto negotiation 10/100/1000, full- & halfduplex, flow control disable/enable, data rate
Port status display

 As per port: Data rate, duplex, link, flow control, auto negotiation, trunk

VLAN

max. 64 VLAN ID & 802.1Q VLAN & port based

Link Aggregation
802.3ad LACP, static trunk, 12 groups with 16 ports
QoS
Class of Service IEEE 802.1p per port 8 priorities
Security
FCC Class A, CE, SSH v1 and v2, SSL for GUI
User authentication with private key
Multicast
IGMP v1, v2, v3
 MVR, Multicast VLAN registration
Standards
802.3, 10Base-T Ethernet
802.3u, 100BaseTX and100BaseFX Fast Ethernet
802.3ab, 1000Base-T
802.3z, 1000Base-X
802.3x, Flow Control und Back Pressure
802.1d, Spanning Tree
802.1w, Rapid Spanning Tree
802.1s, Multiple Spanning Tree
ITU-TG.8032 / Y.1344 Ethernet Ring Protection Switch
802.3ad, Port Trunk mit LACP
802.3af Power over Ethernet
802.3at Power over Ethernet PoE+
802.1p, Class of Service
802.1q, VLAN Tag
802.1x, User Authentication (RADIUS)
802.1ab LLDP
IEEE 1588 V2, PTP

Firmware (FW-Download)

You need an account to download the firmware. Please log in or register. Registration must be activated by us.

More

Software (SW-Download)

You need an account to download the software. Please log in or register. The registration must be activated by us.

Downloads

Complementary products

Scroll to Top

Select at least 2 products
to compare