PD-VDSL-MI1GQ
- Not compatible with the PD-VDSL-MI1G
- Copper port 10/100/1000TX, RJ45
- VDSL2 extender port, RJ45
- Robust metal housing
- Easy to use
- Power supply 12-24VDC, power adapter included
The PD-VDSL-MI1GQ is an Ethernet extender designed for wide-range Ethernet applications. It is equipped with an Ethernet port and a VDSL2 port (RJ-45 connector) in a metal housing for easy installation in harsh environments. It is a bridge modem. The VDSL2 technology used allows Ethernet signals to be transmitted over distances of up to 2km via a twisted pair cable. The PD-VDSL-MI1Q supports both symmetrical and asymmetrical transmissions and can transmit at a data rate of up to approx. 100 Mbps. The extender can be mounted as a tabletop model or on a DIN rail with the optional PD-DIN-kit. With the 19" subrack PD-R2, up to 17 individual PD-VDSL-MI1Q can be accommodated on 2U.
Product information
Brief description
VDSL bridge for UTP cable
System Notes
If several cables have to be lined up on a connection route, it is important that these transitions are technically as good as possible. I.e. ideally, professionally assembled RJ45 plugs are used for the transitions. If this is not possible, e.g. when using telephone cables, care should be taken to ensure that the stranding of the wire pairs is kept to a minimum. The contact between the cores of the cables to be connected must be galvanically as good as possible.
Shielded cables can cause problems due to potential equalisation currents.
For installations, especially outdoors, it is recommended to protect the devices on the line side with a surge protector. We recommend the products of DEHN + SÖHNE GmbH + Co.KG for this purpose.
Technical data
The values mean: Distance [m] / Downstream data rate [MBit/s] / Upstream data rate [MBit/s].
100 / 95 / 95
250 / 80 / 60
350 / 55 / 45
600 / 25 / 20
850 / 15 / 10
1200 / 10 / 5
2000 / 5 / 2
12-24VDC, hollow plug 2.1 / 5.5
Incl. adapter for screw terminal
Net weight: 0.33 kg
Firmware (FW download)
You need an account to download the firmware. Please log in or register. Registration must be activated by us.
Software (SW-Download)
You need an account to download the software. Please log in or register. The registration must be activated by us.
