VI-3003
- Small design
- Power supply via PoE or locally
- PoE 802.3af/at 30W
- 3 x 10/100/1000 BaseT
- Extended temperature range
The VI-3003 is a 3-port IP switch with PoE. Its compact design and wide operating temperature range make it ideal for use in remote locations, including outdoors. The switch can be powered by PoE and itself supplies PoE to the connected end devices. The switch can also be powered locally. The VI-3003 can also be used in a cascade, connecting several locations, each with one end device, with just one cable.
Product information
Brief description
3-port IP switch with PoE
Systemhinweise
CAUTION
Do not connect a non-PoE device to port 2 of the Vi3003. This may damage the non-PoE device. If you need to connect a non-PoE device to port 2, use a VI-0025 between port 2 and the RJ45 connector of the non-PoE device. The VI-0025 only forwards the data from the Ethernet connection and blocks the PoE on this line.
Do not connect a non-PoE device to port 2 of the Vi3003. This may damage the non-PoE device. If you need to connect a non-PoE device to port 2, use a VI-0025 between port 2 and the RJ45 connector of the non-PoE device. The VI-0025 only forwards the data from the Ethernet connection and blocks the PoE on this line.
Technical data
Copper Ports
3 x 10/100/1000TX, RJ45
1 x PoE IN 60W
Max. PoE with power supply via PoE IN
Port 1: 30W Class 4
Port 2: 25W Class 4
Max. PoE with a DC power supply via a hollow plug; see below
Port 1: 60W Class 8
Port 2: 30W, Class 4
PoE OUT means the switch is a PSE (Power Sourcing Device) and powers, for example, a camera
PoE IN means the switch is a PD (Powered Device) and is powered via PoE
1 x PoE IN 60W
Max. PoE with power supply via PoE IN
Port 1: 30W Class 4
Port 2: 25W Class 4
Max. PoE with a DC power supply via a hollow plug; see below
Port 1: 60W Class 8
Port 2: 30W, Class 4
PoE OUT means the switch is a PSE (Power Sourcing Device) and powers, for example, a camera
PoE IN means the switch is a PD (Powered Device) and is powered via PoE
Supply Voltage
In PoE mode, the power supply is provided via PoE on the PoE IN port
. If the VI-3003 is required to deliver a total of more than 55W or more than 30W on Port 1, the VI-3003 must be powered by a local power supply unit rated at 56VDC and at least 120W
If only data is being transmitted and no PoE is available, the VI-3003 must also be powered locally.
Local power supply: 52–56 VDC, hollow plug, e.g. via VI-1120
. If the VI-3003 is required to deliver a total of more than 55W or more than 30W on Port 1, the VI-3003 must be powered by a local power supply unit rated at 56VDC and at least 120W
If only data is being transmitted and no PoE is available, the VI-3003 must also be powered locally.
Local power supply: 52–56 VDC, hollow plug, e.g. via VI-1120
Power Consumption
Switch only, without PoE: 3W
IP Schutzart
IP33
Operating temperature
-40°C to +75°C
Power Loss
34 BTU/h
Dimensions
25 x 45 x 105mm (HxWxL)
Weight
Gross weight: 0.19 kg
Net weight: 0.12 kg
Net weight: 0.12 kg
Firmware (FW download)
You need an account to download the firmware. Please log in or register. Registration must be activated by us.
Software (SW-Download)
You need an account to download the software. Please log in or register. The registration must be activated by us.
Downloads
Manual
