VI-3002
- IP/PoE-repeater for UTP cables
- Distances up to 200m
- PoE 802.1af, at and PoE++
- No power supply needed in PoE mode
The VI-3002 is a 10/100Mbps Ethernet and PoE/PoE+/PoE++ repeater. The repeater allows to connect two or more UTP-Cat5/6 cables and thus to multiply the cable distance. The devices do not need any software configuration. Diagnostic LEDs provide an overview of the operating status. Due to the small dimensions, the repeaters can also be mounted in very confined spaces.
Product information
Kurzbeschreibung
IP- / PoE-Repeater through UTP cables (paired cables)
Technical data
Kupfer Ports
2 x 10/100BaseT, RJ45, PoE, PoE+, PoE++
Übertragungskabel
Ideal type: Cat5e and superior
Distanzangabe
The repeater VI-3002 can transmit more than 100m cable on both sides. By combining several repeaters in a row, even greater distances can be covered. It should be noted that the PoE power decreases due to the voltage drop in the cable and the repeaters' own requirements.
Maximum number of repeaters, guideline values:
Maximum number of repeaters, guideline values:
| PoE Power | Distance | Number of VI-3002 |
| 60W | 130m | 1 |
| 25W | 300m | 2 |
| 5W | 500m | 4 |
Speisespannung
No separate power supply required due to POE operation.
Leistungaufnahme
1W
Betriebstemperatur
-10°C ... +70°C
Verlustleistung
34 BTU/h
Abmessungen
23 x 25 x 69mm
Gewicht
Gross weight: 0.05 kg
Net weight: 0.05 kg
Net weight: 0.05 kg
Firmware (FW download)
You need an account to download the firmware. Please log in or register. Registration must be activated by us.
Software (SW-Download)
You need an account to download the software. Please log in or register. The registration must be activated by us.