VI-COAX-2400A

  • IP/PoE extender for coaxial cable
  • Recommended for use on the camera side
  • 1 channel
  • Distances up to 500m
  • PoE 802.1af and at
  • Does not require a power supply in PoE mode
DATA SHEET
CONTACT US
Product information
Technical data
Firmware
Software
Downloads
Complementary products

The VI-COAX-24xxA series transmits 10/100Mbps Ethernet and PoE/PoE+ with coaxial cable up to a distance of 500m. The Pass Through technology makes it possible to pass on the PoE supply of e.g. a midspan directly via a coaxial cable. The units do not require any software configuration. Diagnostic LEDs provide an overview of the operating status. The modules of the VI-COAX-24xxA series can be mounted as tabletop models, on top-hat rails and in 19" cabinets.

Product information

Brief description

IP / PoE extender via coaxial cable

System Notes

We recommend using the VI-COAX-2400A on the camera side.

Technical data

Copper Ports
1 x 10/100BaseT, RJ45
Extender Ports
1 x coax, BNC
Transmission Cable
50Ohm: RG6, RG58A/U, RG58C/U, RG58U or equivalent 75Ohm: RG59 or equivalent
Distance Specification
The maximum transmission distance when using the cables listed is 500m. When transmitting PoE, the power loss of the transmission path must be taken into account.
Supply Voltage
In PoE mode, the power supply is provided by the PoE. If only data is transmitted and no PoE is available, the devices must be supplied with power locally. Local power supply: 12VDC
Power Consumption
2W
Operating temperature
-40 to +75°C
Power Loss
7 BTU/h
Dimensions
55 x 45 x 27mm
Weight
Gross weight [kg] 0.163
Net weight [kg] 0.091

Firmware (FW download)

You need an account to download the firmware. Please log in or register. Registration must be activated by us.

Software (SW-Download)

You need an account to download the software. Please log in or register. The registration must be activated by us.

Downloads

Complementary products

Scroll to Top