VI-COAX-2404AB

  • IP/PoE extender for coaxial cable
  • Use on the central side
  • 4 channels
  • Distances up to 500m
  • PoE 802.1af and at
  • No power supply required in PoE operation
DATA SHEET
CONTACT US
Product information
Technical data
Firmware
Software
Downloads
Complementary products

The VI-COAX-24xxA series transmits 10/100Mbps Ethernet and PoE/PoE+ with coaxial cable up to a distance of 500m. The Pass Through technology makes it possible to pass on the PoE supply of e.g. a midspan directly via a coaxial cable. The units do not require any software configuration. Diagnostic LEDs provide an overview of the operating status. The modules of the VI-COAX-24xxA series can be mounted as tabletop models, on top-hat rails and in 19" cabinets.

Product information

Brief description

IP / PoE extender via coaxial cable

System Notes

4-port module for connecting four separate extender lines.

Technical data

Copper Ports
4 x 10/100BaseT, RJ45
Extender Ports
4 x coax, BNC
Transmission Cable
50Ohm: RG6, RG58A/U, RG58C/U, RG58U or equivalent 75Ohm: RG59 or equivalent
Distance Specification
The maximum transmission distance when using the cables listed is 500m. When transmitting PoE, the power loss of the transmission path must be taken into account.
Supply Voltage
Power supply 12VDC
Separate power supply VI-0014AB included in the scope of delivery.
The power supply does not insert PoE and is only used to operate the device.
Power Consumption
8W
Operating temperature
-40 to +75°C
Power Loss
27 BTU/h
Dimensions
125 x 95 x 60mm
Weight
Gross weight [kg] 0.457
Net weight [kg] 0.392

Firmware (FW download)

You need an account to download the firmware. Please log in or register. Registration must be activated by us.

Software (SW-Download)

You need an account to download the software. Please log in or register. The registration must be activated by us.

Downloads

Complementary products

Scroll to Top