VI-UTP-2300A
- IP/PoE extender for UTP cable
- Recommended for use on the camera side
- 1 channel
- Distances up to 500m
- PoE 802.1af and at
- Does not require a power supply in PoE mode
The devices of the VI-UTP-23xxA series transmit 10/100Mbps Ethernet and PoE/PoE+ with UTP or Cat cable up to a distance of 500m. The Pass Through technology makes it possible to pass on the PoE power supply, e.g. of a midspan, directly via UTP or Cat cable. The devices do not need any software configuration. Diagnostic LEDs provide an overview of the operating status. The modules of the VI-UTP-23xxA series can be mounted as desktop models, on DIN rails and in 19" cabinets.
Product information
Brief description
IP / PoE extender via UTP cable
System Notes
We recommend using the VI-UTP-2300A on the camera side.
Technical data
Other types:
When using Cat3 cables (telephone cable) or bell wire, the possible distances are significantly reduced.
When using Cat7 cables, you can expect approximately the same distances as with Cat5e/Cat6. The shields of the Cat7 cable must not be grounded.
When transmitting PoE, the power loss of the transmission path must be taken into account.
Net weight [kg] 0.07
Firmware (FW download)
You need an account to download the firmware. Please log in or register. Registration must be activated by us.
Software (SW-Download)
You need an account to download the software. Please log in or register. The registration must be activated by us.
Downloads
Manual
Schematic Files
Complementary products
-
VI-UTP-2301A
UTP/coax extender -
VI-UTP-2304AB
UTP/coax extender -
VI-UTP-2308AB
UTP/coax extender -
VI-UTP-2316AB
UTP/coax extender
