LT-L802GBTME

  • DIN rail mounting
  • Copper ports: 8 x 10/100/1000Tx, RJ45
  • Fiber optic ports: 2 x 100/1000 Mbit/s SFP
  • Layer 3 static routing
  • Managed, redundant ring possible
  • Power voltage 12-48VDC, redundant
DATA SHEET
CONTACT US
Product information
Technical data
Firmware
Software
Downloads
Complementary products

The robust LT-802GBTME is a high quality switch for the implementation of powerful 10, 100 and 1000Mbit Ethernet ring network structures according to IEEE802.x. This device was developed especially for the industrial environment. The switch allows the construction of a fault-tolerant fiber optic ring via two connections. In the event of an interruption, the ring closes automatically in less than 50ms. This increases the reliability of the system. Two SFP bays for 100/1000BaseSX/LX/ZX are available for the backbone, which can be equipped either for multimode or singlemode fibers.

The switch can also be used as a stand-alone device, for point-to-point connections or as connection modules. The extensive possibilities of the management software also allow the use of the switch in systems with high demands on the functionality of the network. Installation is very quick and easy thanks to the mounting device for DIN rails. The electrical and optical connections are ensured by standardized plugs (RJ45 or LC).

Product information

Brief description

Industrial switch with management

Technical data

Copper Ports
8 x 10/100/1000TX
Fiber Ports
2 x 100/1000, SFP

We recommend the use of our barox SFPs. We do not test or guarantee the compatibility of our devices with SFPs of other manufacturers.

Console Port
RS232, 115,2kBit/s, 8, N, 1, RJ45
USB config port: For FW update, backup, restore, boot up and syslog, USB2.0 A type
Supply Voltage
12-48VDC, redundant supply possible, screw terminal
Power Consumption
Max. 15W
Operating temperature
-40°C ...+75°C
Power Loss
51 BTU/h
Dimensions
142x56x99mm (HxWxL)
Weight
Gross weight [kg] 1.223
Net weight [kg] 0.965
Test Standards
EMV:
IEC61000-4-2, 4-3, 4-4, 4-5, 4-8
IEC61000-6-2, 6-4
Free fall: IEC60068-2-32  
Shock: IEC60068-2-27  
Vibration: IEC60068-2-6
Backplane
20 GBit/s
MAC Table
8k
Configuration
Webserver, Telnet, CLI, SNMP v1/v2/v3, TFTP, SSH, SSL, RMON, USB
Port Settings
Per Port: Port disable/enable, Auto negotiation 10/100/1000, Full- & halfduplex, Flow Control disable/enable, data rate
Port Status Display
Per Port: Data rate, Duplex, Link, Flow Control, Auto Negotiation, Trunk
VLAN
max. 64 VLAN ID & 802.1Q VLAN & Port Based
Link Aggregation
802.3ad LACP, static Trunk, 12 groups with 16 ports
QoS
Class of Service IEEE 802.1p per port 4 priorities
Security
FCC Class A, CE, UL
Multicast
IGMP v1, v2
Standards
802.3, 10Base-T Ethernet
802.3u, 100BaseTX and 100BaseFX Fast Ethernet
802.3ab, 1000Base-T
802.3z, 1000Base-X

802.3x, Flow Control and Back Pressure
802.1d, Spanning Tree
802.1w, Rapid Spanning Tree
802.1s, Multiple Spanning Tree
ITU-TG.8032 / Y.1344 Ethernet Ring Protection Switch
802.3ad, Port Trunk with LACP
802.1p, Class of Service
802.1q, VLAN Tag
802.1x, User Authentication (RADIUS)
802.1ab LLDP

Firmware (FW download)

You need an account to download the firmware. Please log in or register. Registration must be activated by us.

More

Software (SW-Download)

You need an account to download the software. Please log in or register. The registration must be activated by us.

Downloads

Complementary products

Scroll to Top