RY-LGSP23-10G

  • 19" Switch L2/L3 with PoE+
  • Copper ports: 10x10/100/1000TX
  • Optical-fibre ports: 2xSFP 100/1000Mbit/s (Combo)
  • With management, ring-capable, functions L3
  • Fanless
  • Power supply 230VAC
DATA SHEET
CONTACT US
Product information
Technical data
Firmware
Software
Downloads
Complementary products

Being developed for tasks with high data volume, this layer 2/3 switch with L3 fonctions is suitable for example for video over IP and video streaming in connection with multicast as well.IP-cameras are supplied by PoE through the data cable. Its compact design and reduced number of ports make this switch ideal for smaller plants or as a remote unit in a larger network.With its extensive management possibilities, it is also suitable for complex network structures

Product information

Short description

19"-Switch with management and PoE +

Special features for video networks

Video-friendly features
Extra high backplane performance for a smooth video transmission with all ports assigned. Support of Jumbo Frames up to 9600Bytes by 100MBit/s.  MAC-address restriction ensures port security.  

Active monitoring of the camera
Switch-powered cameras by PoE are constantly monitored. In case of a camera failure the switch automatically restarts the camera. If this is not possible the switch alarms by SNMP.  

Active monitoring PoE-supply
The switch alarms by SNMP in case of sudden excessive power consumption by a defect camera for example.

Active management of the PoE-performance 
The PoE-ports can be started by time intervals so as to prevent an overload of the PoE power supplies.

DMS

DMS (Device Management System)


This switch disposes of an integrated network monitoring and control system which gives the user a good overview over the whole network in an easy way. This DMS-system has the following qualities:


Graphical network map 
The network map gives a quick overview over all switches and terminal devices such as IP-cameras or servers indicating the IP-address, type of device and equipment. Plans and maps can be saved as background pictures and thus enable the user to access to certain devices without knowledge of the entire IP-structure. 

Device search
This function enables the access to a specific device also in large networks. Recently added devices, as per example a new IP-camera, are immediately displayed and thus enable a direct access. 

Data traffic display
Graphical display of data traffic per port in a time axis. 

Error handling and security
Network diagnosis between master switch and terminal devices. Protective mechanisms such as data flow restriction guarantee an effective protection against inadvertent access. IEEE802.3ah and IEEE802.1ag provide tools for structuring of networks. 

Active PoE Device Detection

Cameras powered by PoE from the switch can be monitored continuously. If a camera fails, the switch automatically restarts the camera using a PoE restart and sends a notification via SNMP.

Installation method

19"-mounting

Ventilation

Fanless

Contents of the pack

Switch
19" mounting bracket
Self-adhesive rubber feet
Mains cable
RJ45 to D-Sub 9 console cable
Information card QIG

Technical data

Copper ports
8 x 10/100/1000TX, PoE+, RJ45
Maximum PoE power for all ports: 130W
PoE ports
8 x 802.3af/at, PoE+, 30 W, Class 0-4
PoE budget
130 W
Fibre optic ports
2 x 100/1000, SFP or 10/100/1000TX, RJ45 (Combo)
We recommend the use of our barox SFPs. We do not test or guarantee the compatibility of our devices with SFPs of other manufacturers.
Console port
1 x RS232, RJ45
Supply voltage
100-240VAC, 50-60Hz
Power consumption
Max. 40W (witout PoE) / 170W (with PoE)
MTBF
25°C: 590'225h
40°C: 356'296h
Operating temperature
0°C to 40°C
Thermal power loss
177 BTU/h
Dimensions
220 x 243 x 44mm (width × depth × height)
Weight
Gross weight: 2.9 kg
Net weight: 2.4 kg
Backplane
20GBit/s
MAC table
32k
Forwarding Rate
14.9 Mpps
xNMS Support
Supports xNMS version 1.0 and above
Firmware version xy and above
Configuration
Console, Web GUI, SNMPv1, v2c and v3
PoE Management
GUI, CLI, SNMP
Port settings
Port disable/enable. Auto-negotiation 10/100/1000Mbps. Flow Control disable/enable. Data rate control on every port. Max. framesize, power control
Port status display
Display per port: Speed link status, flow control status. Auto negotiation status, trunk status.
Layer3 functions
IPv4 and IPv6 Unicast: static routing
VLAN
802.1Q Tagged based VLAN, up tp 255 VLAN-groups, Q-in-Q, private VLAN
Link Aggregation
IEEE 802.3ad LACP / Static Trunk, 18 groups of 8-port trunks or static trunk
QoS

Traffic classification based, strict priority and WRR, 4-level priority for switching


- Port number


- 802.1p priority- DS/TOS field in IP package

Security
SSH, SSL, 802.1X RADIUS, Port Security, ACL with MAC, IP, MUlticast etc.
User authentication with private key
Multicast
IGMP v1/v2/v3 snooping, up to 1024 multicast groups, source-specific multicast, IGMP Proxy
Topology
STP, RSTP, MSTP
Standards
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x Flow Control and Back pressure
IEEE 802.3ad Port trunk with LACP
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid spanning tree protocol
IEEE 802.1s Multiple spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af/at Power over Ethernet
IEEE 802.az Energy Efficient Ethernet

Firmware (FW download)

You need an account to download the firmware. Please log in or register. Registration must be activated by us.

More

Software (SW-Download)

You need an account to download the software. Please log in or register. The registration must be activated by us.

Downloads

Complementary products

Scroll to Top

Select at least 2 products
to compare